Hi Raimund =
Think a lot of the List would like a schematic of this if possible.
Can you indicate which pine numbers are in use at each end of the
cable please as this seems to be the sticking point in getting an
external power supply up and running.
Cheers = Bryan Vallance
Plymouth UK
--- In "Raimund Specht"
<> wrote:
>
> Eric Benjamin wrote:
> > I haven't done it, but it shouldn't be difficult to rig up an
> adapter to
> > recharge the device through its USB port. If you would like for
me
> to work
> > up a schematic, contact me off-list.
>
> I recently discovered that the MicroTrack 24/96 accepts voltages
> between about 4.5 and 6V (the AC adapter that came with my unit
> provides 6V). So, it would be possible to directly connect four AA
> cells (either alkaline or NiMH) without any additional 5V voltage
> regulator. Here is the simple battery adapter that I assembled by
> using hot glue:
>
> http://www.avisoft.com/scratch/MTPower.jpg
>
> Regards,
> Raimund
>
________________________________________________________________________
________________________________________________________________________
|
