[Sorry about the multiple posts people!]
At 9:19 AM +0200 10/20/05, Gianni Pavan wrote:
>At 18.17 19/10/2005, Rob D. wrote:
<snip>
>>are you using the Mic2496's A-D mic pre circuit to compare the
>>mics?
>
>
>I made the test with the mics directly connected to the Mic2496 or to
>the MOTU or to the MT2496.
Okay. As the Rodes' self noise is evident with both of these pres,
your Mic2496 is performing ~7dB(A) better than Bob projected.
We'll see how Eric's test goes. If MT2496's pre masked the self noise
of your Sony MS-957, that's not very promising.
>
> >Is it possible that the "digital boost" in the MT2496's menu
>>setting is the "Hi Setting" to obtain the higher ~55dB gain?
>
>I don't know how much gain I really set on the MT2496. I used the H
>setting (new firmware, of course) but avoided to use the digital
>boost (27dB) available in the menus.
Okay, looks like you were using ~53dB gain in your test. Rob D.
<snip>
>
>--------------------------------------------------------------
>Gianni Pavan
--
Rob Danielson
Film Department
University of Wisconsin-Milwaukee
________________________________________________________________________
________________________________________________________________________
|