[Top] [All Lists]

Re: Shure 183 p-i-p adapter cable

Subject: Re: Shure 183 p-i-p adapter cable
From: Rob Danielson <>
Date: Tue, 17 Aug 2004 00:35:20 -0500
Hi Eric-- We have two pair of the omnis (183's) on order that we'll 
be modifying. At least two people on this list have considerable 
experience with the omni's.  I'm not aware of anyone who has modified 
the  184 or 185 yet. Best, Rob D.

At 12:49 PM -0700 8/16/04, Eric Benjamin wrote:
>I recall your interest in these capsules from before,
>and that is one of the reasons that I compiled the
>report that is in our files section.  These capsules
>are unique in their low-noise capabilities.  Do I
>gather correctly that you have acquired some of them?
>If so, how do you like them?  And I'm curious to know
>if you have tried either the cardioid or hypercardioid
>--- Rob Danielson <> wrote:
>>  I ran into an IT technician form Shure this weekend
>>  and he mentioned
>>  that for their own recording interests, some of the
>>  engineers at
>>  Shure have made small "T" shaped stereo mics from
>>  183 capsules to run
>>  off of MD mic jack power.  Rob D.
>  >


<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU