naturerecordists
[Top] [All Lists]

Audio Buddy - DC power

Subject: Audio Buddy - DC power
From: "Evert Veldhuis" <>
Date: Thu, 26 Aug 2004 18:45:59 -0000
Hi all,

Rob already showed the picture with the words in it.
(http://www.uwm.edu/PSOA///Film/Danielson/Mic%
20Preamps/AudioBuddy_PCBoard.jpg) 

I no longer have the data of this modification, but it was easy to 
make the mod without damage; you could still opt for using the 
adapter when you were indoors and use batteries outdoors.

Some info for people with a solder-iron; 
7915 has 3 leads ; from left to right they are: 1 ground - 2 input - 
3 output (see http://www.national.com/ds/LM/LM7905.pdf)
 
7815 has 3 leads ; from left to right they are: 1 input - 2 ground - 
3 output (see http://www.national.com/ds/LM/LM7512C.pdf)

Regards, Evert





________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
  • Audio Buddy - DC power, Evert Veldhuis <=
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU