New software uploaded by Christopher on Oct 28 03:20:00 MSK 2006

To: <>
Subject: New software uploaded by Christopher on Oct 28 03:20:00 MSK 2006
From: "Windows Software" <>
Date: Fri, 27 Oct 2006 19:37:20 -0600
Christopher has uploaded some new software for you!

Click here to view available updated software:

Reminder - Do not use this program while logged in via telnet or rlogin.
(Bugs in plain 16550's prevent the use of the 16-character buffer, so
disk sd0 at scbus0 target 0 unit 0 [SCSI disk 0 is at scbus 0, LUN 0]
This is a longer description of the port.  One to a few paragraphs
you better stick to 50 pins cabling in accordance with the SCSI
boot ROM, which is generally indicated by some sort of message when
This is a minicartridge tape drive.
are wondering where you can find this stuff, it all lives in
file system with the option "-r=1024".  These options may be specified
        for its case.
Here is one final, somewhat complex example.    We will add a DVI filter
cat > /mnt/etc/passwd <<EOM
remote hosts.  In this case, it acts just like a regular host
distribution files, simply set ${DISTFILES} explicitly.  If only a
sio7: type 16550A (multiport)
/usr/src/gnu, and is therefore easily identifiable to anyone for
``Tandberg TDC 3600''
turn away if they hurt their eyes!  CATEGORIES
cp -f /dev/MAKEDEV /mnt/dev
stage, go read the Q&A section of the Hardware Guide for possible
Start, and Parity bits added by the UART in the DTE (the computer)
still get them and be charged for them since LPD does not pass any
where command is the name of the command you wish to learn about.  For
your particular modem as the PPP dialer provides only a very simple
4.  Grab the pre-compiled package from a ftp server. The ``master''
difference from the 3 meters for a single-ended fast-SCSI bus. The
vn|VH1200|Very High Speed Modem at 1200,8-bit:\
o  General purpose hardware such as disk drives, memory or complete
all the same directories that had been created for math.install.  When  Preparing for NFS installation
23:#13 0xf0132c34 in spec_open ()
is that interests you.  The primary services we offer are:
edit your custom kernel configuration, and compile, which is the
defined (sl0 and sl1); you can use netstat -i to see whether these
If you are testing a new kernel, for example by typing the new  /etc/ttys
and files in your makefiles directory.  (Note:
custom bootable floppies you made in step two.)  and backup tapes.    ldconfig
earlier port screwed up and used it in the wrong place does not mean
-t Print troff data.
For instance an Adaptec 1542 controller can be set to use different
The official sources for FreeBSD available via anonymous FTP from:
the name of the C function to implement it is `crypt'.  In FreeBSD 1.x
simply called LPD.
If you prefer to statically link the emulator in the kernel rather
the first letter) to lowercase.  If the software in question really
passwords are permitted on the console.
file, where it puts logs of sessions.  After this math.install will
QIC-150 tapes and drives are, perhaps, the most common tape drive and
To get it to work, I had to disable the sector translation and the
# The next macro will dial up and login
boot into the CD installation directly from DOS using Walnut Creek's
o  Asente, Paul. X Window System Toolkit. Digital Press.
accessible.  Spooling directories should be owned and be readable,
Last login: Mon May  1 21:14:47 from grumble
        Write back cache coherency problems.  Hardware flaw, only known
prompt, we use a trusted machine and the `key' program.  (There are
o   Remote address of the SLIP link
Mar 29 21:16:37 yedi /386bsd: st1: Archive  Viper 150 is a known rogue
and files in your makefiles directory.  (Note:
device pca0 at isa? port ``IO_TIMER1'' tty
        When a chain entry reaches the packet limit specified, logging
nel and most likely not do anything at all since the crash dump and
o   Data Terminal Ready (DTR)
The lpq command also support a -l option to generate a detailed long
create a directory there, and make a symbolic link from /usr/ports to
from standard input.    It wants to work with a filename.  What is
specify the hostname of the printer as the first argument and the port
The first floppy that you will need in addition to the boot.flp image
Reported by: Marc van Kempen  "REV73R1" Andrew Gordon
In my case, the controller could not handle this number of sectors. It
If you are in an environment where you have to account for printer
pause 1
You should now edit the krb.conf and krb.realms files to define your
0 $page_height $border 2 mul sub rlineto
2. Change to the /dev directory:
Data transfer rate is 183kB/s.
that seven-bit words of data actually take 10 bits to be completely
        exit 2
printer for its page count (how many pages it has printed in its
directly print plain text.  The simple setup outlined above and
grunt$ klist
Line 11:
commands with which you can query your devices on their hardware
floppy, e.g.: a:\bin\bin.aa, a:\bin\bin.ab, and so on.
In order to use printers with FreeBSD, you will need to set them up to
        Bits per Second - the rate at which data is transmitted
contact the FreeBSD ports mailing list <freebsd-portsFreeBSD>.
pseudo-device snp number
o  Disable device drivers for hardware not present in your system.
The goal of the new ports collection is to make each port as `plug-
determine the root filesystem and initialize user-land things. This
command line) which one to use.  If your users are not particularly
        from the current boot.
where command is the name of the command you wish to learn about.  For
always guarantee that we will get to your questions in a timely
This section is still under development.
only be used for terminals which are physically secure (such as the
The following list of sample hardware configurations by no means
expects the output filter to stop itself by sending two bytes to the
The "g" is the product grade field.  If an "I" preceeds the package-
links, such as a serial cable running between a laptop computer and
present. To enable the controller to uniquely identify which drive it
for whatever purpose, so that the code gets the widest possible use
below. Note that lines that end in a ``:'' start in column 1, all
``Trying It Out'' and ``Troubleshooting''.
portsFreeBSD> and not the maintainer. Thank you!)
these are printed out in reverse order of eventual use.  If you are
3.   Essentially, if you need rapid on-demand access to the source and  Donating funds

<Prev in Thread] Current Thread [Next in Thread>
  • New software uploaded by Christopher on Oct 28 03:20:00 MSK 2006, Windows Software <=

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU